Posts Tagged ‘Column’

Column Covering – Footing

8 July 2016 Gareth Morgan No Comments
ArchiCAD 18, ArchiCAD 19, Tip of the Day

You can add a round or rectangular footing your column using the Cadimage Coverings Tool. The result will look similar to the image below (depending on your settings): 1. Go to your Plan View 2. Select your column 3. Go to Cadimage > Coverings > Column Coverings 4. Select the Cadimage Column Footing item: For

Read More


Tags: , ,

Column Veneer

5 November 2014 Soto No Comments
ArchiCAD 17, ArchiCAD 18, Tip of the Day

Add a veneer around it a column core. Just open the column settings>Geometry and Positioning You can enter a value in the field to the right to define; 1. Building Material 2. Component 3. Thickness This thickness is uniform all around the core. Note: Veneer option is not available for Complex Profile Columns


Tags: ,

Adding a Column Veneer

2 December 2013 cadimage No Comments
ArchiCAD, Tip of the Day

If you want the column to include a veneer around it, tick the Veneer box. You can enter a value in the field to the right to define the veneer thickness. This thickness is uniform all around the core. Note: Veneer option is not available for Complex Profile Columns


Tags: ,

Angled Columns

12 January 2011 Mark Horrocks No Comments
ArchiCAD, Tip of the Day

You can angle columns by choosing Slanted from within Geometry & Positioning and setting your angle from horizontal.


Tags: , ,